CZ sights & optics

Here you find all the CZ accessories we have for sighting: optic plates for CZ Optics Ready pistols, red dot mounts for CZ pistols without an optic cut, direct-fit red dots and CZ sights. Every part is made for specific CZ models, so pick your model and you see only what fits it.

Pick your CZ model

CZ 75, CZ 75 Compact, CZ 75 P-01, CZ 75 SP-01, CZ 75 SP-01 Shadow, CZ 75 Tactical Sports, CZ 85, CZ 97, CZ Kadet, CZ P-07, CZ P-09, CZ P-09 Nocturne, CZ P-10C, CZ P-10C Ported, CZ P-10F, CZ P-10S, CZ Shadow 2, CZ Shadow 2 Carry, CZ Shadow 2 Compact, CZ Shadow 2 Target, CZ Skorpion Vz 61 and CZ TS 2.

Red dots on a CZ: plate or mount

Optics Ready CZ models have a factory optic cut in the slide, closed with a cover plate, and "Optics Ready" or "OR" in the model name. They take an optic plate that connects the cut to the footprint of your red dot. CZ models without an optic cut take a red dot mount in place of the rear sight, with no slide milling and no permanent modifications. A mount does not fit an Optics Ready model, and a plate does not fit a model without the cut.

CZ has two Optics Ready families, and their optic cuts are different, so a Shadow 2 plate does not fit a P-10, and the other way round:

• Shadow 2 Optics Ready family (Shadow 2 Optics Ready, Shadow 2 Compact, Shadow 2 Orange OR): the widest choice of plates, for the Trijicon RMR, Shield RMSc, Docter, Leupold DPP, Holosun K-series, C-More RTS, Aimpoint Acro, Aimpoint A-CUT and Holosun 509T footprints.
• P-10 Optics Ready family (P-10C, P-10F and P-10S Optics Ready and the P-10C Ported): plates for the Trijicon RMR, Shield RMSc, Docter, Leupold DPP, Holosun K-series, C-More RTS, Aimpoint Acro, Vortex Razor and Holosun 509T footprints.

Some red dots fit the CZ optic cut without a plate: the Holosun SCS P-10 on the P-10 Optics Ready, the Vector Optics Frenzy 1x20x24 on the Shadow 2 Optics Ready, and red dots with the Shield RMSc footprint on the P-09 Nocturne and Shadow 2 Carry.

CZ models that look alike do not always share a rear sight dovetail, so the mounts are made for model families: the Shadow 2 and 75 SP-01 Shadow; the TS 2 and Shadow 2 Target; the CZ 75B, P-01 and 75 SP-01; the P-10C, P-10F and P-10S; the P-07 and P-09; and the Kadet models.

CZ makes its own plates from steel in the Czech Republic. Evo Arms and Eemann Tech also use steel, as do Zendl and KMR for their CZ mounts. 2BME in Poland, Toni System in Italy and Outer Impact and EGW in the USA machine their plates and mounts from aluminium.

CZ sights

CZ sights are our largest sight range. Because CZ models differ in their dovetails, each sight fits a specific model family: the CZ 75B, P-01 and 75 SP-01; the Shadow 2 and 75 SP-01 Shadow; the TS 2 and Shadow 2 Target; the Shadow 2 Carry; the P-07 and P-09; the P-09 Nocturne; the classic P-10; the P-10 Optics Ready; and the Kadet. On the P-10 Optics Ready and the Shadow 2 Carry you can choose co-witness sights, which are tall enough to see through the window of a red dot. LPA in Italy and Zendl in the Czech Republic make most CZ sights from steel; Angry Bear and Night Fision in the USA make fixed sights, including tritium and co-witness versions.

Frequently asked questions

How do I know if my CZ is Optics Ready?

An Optics Ready CZ has a factory optic cut in the slide, closed with a cover plate, and "Optics Ready" or "OR" in its model name. If your CZ has a rear sight in a dovetail and no cover plate, it takes a mount.

Which red dot fits my CZ?

It depends on your model and the plate or mount you choose. Every plate and mount takes one footprint or a group of footprints. Find the footprint of your red dot in its specifications and take the plate or mount for your model that names it.

Do Shadow 2 sights fit my SP-01?

It depends on the variant. The 75 SP-01 Shadow takes Shadow 2 sights. The standard 75 SP-01 takes the sights for the CZ 75 family.

Can I install it at home?

Yes. A plate needs no gunsmith and no milling: remove the cover plate from the optic cut, screw the plate in and the red dot onto it. A mount or new sights need a sight pusher or a punch. Put a drop of threadlocker on every screw.